This forum is no longer active. Please post your questions to our new community site

Recent Posts

Subscribe to Recent Posts 12,162 post(s) found

Pages: 1 2 4 6 7 8 9 405 406

08 Aug, 2011 03:17 PM
Avatar Josué Álvarez 15 post(s)

Topic: General / Joomla on Mac OS X Lion

Hello daveth,

Could you check if /usr/lib/libltdl.3.dylib exists? You can do that by issuing the following command in a terminal:

ls /usr/lib/libltdl.3.dylib

Regards,
Josué

 
08 Aug, 2011 09:35 AM
Avatar Josué Álvarez 15 post(s)

Topic: Cloud (Amazon AWS & BitNami Cloud Hosting) / Installing Alfresco Add-Ons

Hello semalchemy,

Could you try the following?

- Connect to your server with Putty.
- Run this command replacing “installdir” for your application folder and addonurl for the url of the addon you want to install:

sudo wget addon_url —directory-prefix=/installdir/apache-tomcat/shared/lib/

For example, I’m going to install Flickr Dashlet:

sudo wget http://share-extras.googlecode.com/files/flickr… —directory-prefix=/opt/bitnami/apache-tomcat/shared/lib/

And now, restart the server:

sudo /installdir/ctlscript.sh restart tomcat

Hope it helps.

Regards,
Josué

 
08 Aug, 2011 07:20 AM
Avatar Daniel Lopez 140 post(s)

Topic: Cloud (Amazon AWS & BitNami Cloud Hosting) / Remove Bitnami Landing Page

You will need to access the AMI and edit the configuration files or rename the files, as instructed by Beltran

 
07 Aug, 2011 09:34 PM
Avatar semalchemy 6 post(s)

Topic: Cloud (Amazon AWS & BitNami Cloud Hosting) / Installing Alfresco Add-Ons

I tried to do this with filezilla and i know my ppk works fine because i connect with the same one for putty. This is the error.

Response: fzSftp started
Command: keyfile “D:\Program Files (x86)\FileZilla FTP Client\keys\Alfresco-Key.ppk”
Command: open “”mailto:user@ec2-xxx-xx-xxx-xx.compute-1.amazonaws.com">user@ec2-xxx-xx-xxx-xx.compute-1.amazonaws.com" 22
Error: Disconnected: No supported authentication methods available
Error: Could not connect to server

As stated before, a regular connection to FTP port 21 takes me to the alfresco directory but i can’t get to teh root or apache-tomcat dir.

 
07 Aug, 2011 01:35 AM
Avatar semalchemy 6 post(s)

Topic: Cloud (Amazon AWS & BitNami Cloud Hosting) / Remove Bitnami Landing Page

Its the Bitnami Alfesco AWI

 
06 Aug, 2011 06:15 PM
Avatar Tim 2 post(s)

Topic: Redmine / Upgrade Redmine 1.1.2.stable >> 1.2.1 - NoMethodError: undefined method

  • Redmine My Widgets plugin
  • Mylyn Connector plugin

Are the installed plug-ins, which I copied over from the redmine-old/vendor/plugins

 
06 Aug, 2011 10:42 AM
Avatar rajivjackz 2 post(s)

Topic: Liferay / liferay searchengineutil sucks , no result found

HI how searchEngineUtil.search works i get 0 results. i get log like

#|2011-08-06T16:36:14.364+0800|INFO|sun-appserver2.1|javax.enterprise.system.stream.out|ThreadID=28;ThreadName=httpSSLWorkerThread-8080-2;|
****************search********companyId=10114***keywords=32****groupId=10138|#]

[#|2011-08-06T16:36:14.386+0800|INFO|sun-appserver2.1|javax.enterprise.system.stream.out|ThreadID=28;ThreadName=httpSSLWorkerThread-8080-2;|

  • hits.getDocs()===0|#]

[#|2011-08-06T16:36:14.386+0800|INFO|sun-appserver2.1|javax.enterprise.system.stream.out|ThreadID=28;ThreadName=httpSSLWorkerThread-8080-2;|

 
06 Aug, 2011 08:59 AM
Avatar smorris 7 post(s)

Topic: Cloud (Amazon AWS & BitNami Cloud Hosting) / Wordpress - Unable to create directory AWS EC2

Sorry for the double post, I also should have mentioned if I upload an image I get the same error as the original poster.

“xxxxxx.png” has failed to upload due to an error
Unable to create directory /opt/bitnami/apache2/htdocs/wp-content/uploads/2011/08. Is its parent directory writable by the server?

 
06 Aug, 2011 08:57 AM
Avatar smorris 7 post(s)

Topic: Cloud (Amazon AWS & BitNami Cloud Hosting) / Wordpress - Unable to create directory AWS EC2

I’m running bitnami-lampstack-5.3.6-0-linux-x64-ubuntu-10.04-ebs (ami-276a3862). I did a manual install of wordpress in the base folder (/opt/bitnami/apache2/htdocs). The site works, however something is wrong with the file permissions.

-WordPress can’t save files such as updating the .htaccess when modifying permalinks
-WordPress can’t upload or delete new plugins
-WordPress can’t upload media

I edited the php.ini’s upload_tmp_dir and set it to /tmp, but that didn’t do anything (suggested fix from another thread).
opt, opt/bitnami, wp-content folders all have permissions of 755 when viewing in WinSCP.

htdocs permissions are:
drwxr-xr-x 5 bitnami daemon 4096 2011-08-06 08:24 htdocs

 
06 Aug, 2011 05:44 AM
Avatar daveth 4 post(s)

Topic: General / Joomla on Mac OS X Lion

Hi Josué
Thanks very much for that advice. Unfortunately I’m still having trouble. I’ve now tried to reinstall the Bitnami Joomla 1.5.23-0 x86 stack (I must have had a PPC stack) on a Mac (now running OS X 10.7) and now have the following error message:

Dyld Error Message:
Library not loaded: /usr/lib/libltdl.3.dylib
Referenced from: /Applications/joomla-1.5.23-0/*/php.bin
Reason: image not found

The message at the end of the failed installation indicates error running /applications/joomla-1.5.23-0/php is something like:

Error running /Applications/joomla-1.5.23-0/php/bin/php -q /Applications/joomla-1.5.23-0/php/bin/fixreg.php /Applications/joomla-1.5.23-0/php/lib/php/.registry @@BITROCK_PHP_ROOT@@ / Applications/joomla-1.5.23-0/php : dyld: Library not loaded: /usr/lib/libltdl.3.dylib
Referenced from: /Applications/joomla-1.5.23-0/php/bin/php.bin
Reason: image not found
daveth

 
05 Aug, 2011 10:04 PM
Avatar postgis58 2 post(s)

Topic: WAPPStack / Anyone know how to PostGis a WAPPStack?

That was fast.

I ended up using stackbuilder and added in postgis. All worked out well but i did take a while to install. I’m guessing this would not be an option in the cloud environment. Thanks.
 
05 Aug, 2011 03:37 PM
Avatar Josué Álvarez 15 post(s)

Topic: General / Joomla on Mac OS X Lion

Hello daveth:

Have you installed a PPC version of Joomla! stack? Rosetta support (the program that OS X uses to run PPC programs in compatibility mode) was dropped in OS X Lion.

You could go back to Snow Leopard, create a database backup of Joomla!, reinstall Lion, install an Intel version of Joomla! stack, restore any customizations or plugins you had and restore the database backup you made earlier.

Hope this helps you.

Regards,
Josué

 
05 Aug, 2011 03:29 PM
Avatar smorris 7 post(s)

Topic: Cloud (Amazon AWS & BitNami Cloud Hosting) / Can't save phpmyadmin.conf (read-only)

Perfect, thank you Beltran. I may suggest adding the commands in this thread to http://wiki.bitnami.com/Components/phpMyAdmin_a….3f

 
05 Aug, 2011 03:04 PM
Avatar daveth 4 post(s)

Topic: General / Joomla on Mac OS X Lion

Hi
I installed Joomla 1.5 from a Bitnami stack over a year ago on a mac, and all has been working well until I upgraded my mac from os x 10.6 to 10.7 Lion. Now when I execute ctlscript.sh, I get the error
‘Launch of “my_print_defaults.bin” failed: the PowerPC architecture is no longer supported.’

And of course mysql, apache, Joomla don’t run.

Not an expert at this, but is there a revised script that I can use for the newer Intel (not PPC) based Macs.

Help please (because I don’t really want to go back to an older os x 10.6)

Thanks

 
05 Aug, 2011 02:37 PM
Avatar Beltrán Rueda 3,714 post(s)

Topic: Redmine / I can't install plugin redmine_attach_screenshot

Hi,

It seems that you have installed Rails 3 which is not supperted yet in Redmine. Did you upgrade or installed gems?

 
05 Aug, 2011 08:57 AM
Avatar edwin 3 post(s)

Topic: Redmine / I can't install plugin redmine_attach_screenshot

C:\Program Files\BitNami Redmine Stack\apps\redmine>rake db:migrate RAILS_ENV=“p
roduction”
rake/rdoctask is deprecated. Use rdoc/task instead (in RDoc 2.4.2+)
WARNING: ‘task :t, arg, :needs => [deps]’ is deprecated. Please use ‘task :t, [
args] => [deps]’ instead.
at C:/Program Files/BitNami Redmine Stack/apps/redmine/lib/tasks/email.rake:
170:in `block (2 levels) in <top (required)>’
config.load_paths is deprecated and removed in Rails 3, please use autoload_path
s instead
config.load_paths= is deprecated and removed in Rails 3, please use autoload_pat
hs= instead
rake aborted!
no such file to load — ftools

Tasks: TOP => db:migrate => environment
(See full trace by running task with —trace)

 
05 Aug, 2011 08:06 AM
Avatar Beltrán Rueda 3,714 post(s)

Topic: WAPPStack / Anyone know how to PostGis a WAPPStack?

Hi,

I have just written a quick guide about how to install PostGIS on BitNami LAPP Stack at http://wiki.bitnami.com/Components/PostgreSQL#How_to_install_PostGIS_in_the_PostgreSQL_database.3f i hope it helps.

 
05 Aug, 2011 07:49 AM
Avatar Beltrán Rueda 3,714 post(s)

Topic: Alfresco / 127.0.0.1 to 192.168....

Hi,

Alfresco does not need any change, you should be able to connect to Alfresco from other computers in your network.

 
05 Aug, 2011 07:47 AM
Avatar Beltrán Rueda 3,714 post(s)

Topic: Redmine / can't backup mysql database

Right, the user is root and the password is the same that you set during the installation. The “bitnami” user is only to connect the application with the database for security reasons.

 
05 Aug, 2011 07:17 AM
Avatar Beltrán Rueda 3,714 post(s)

Topic: Cloud (Amazon AWS & BitNami Cloud Hosting) / Can't save phpmyadmin.conf (read-only)

Hi,

The problem is that you need root privileges to modify this file. Try to connect through SSH and edit the phpmyadmin.conf file:

sudo vi /opt/bitnami/apps/phpmyadmin/conf/phpmyadmin.conf

Then restart the server:

$ sudo /opt/bitnami/ctlscript.sh restart apache

 
05 Aug, 2011 06:53 AM
Avatar abarry 1 post

Topic: Alfresco / 127.0.0.1 to 192.168....

How can I change the URL to go from 127.0.0.1 to my computers IP address.

I need to figure out how I can get other computers on the network to connect to the alfresco site.

Thanks.

 
05 Aug, 2011 06:49 AM
Avatar iamhanqi 2 post(s)

Topic: Redmine / can't backup mysql database

OK,i know the raeson.
The username is root,the password is that you given when you installed remine.(the first installion input page)
so,the yml file showes the encoding password “68cee79453”.

 
05 Aug, 2011 06:15 AM
Avatar iamhanqi 2 post(s)

Topic: Redmine / can't backup mysql database

Hi,

I have a quesstion about redmine mysql DB backup.My redmine’s version is 1.2.1

When I type the command to backup the database:
\installdir\mysql\bin\mysqldump -u root -p bitnami_redmine > e:\backup.sql

it output:

Enter password: **********
mysqldump: Got error: 1045: Access denied for user ’root’@’localhost’ (using password: YES) when trying to connect

It seems the password’s mistake.

But i tried these two passwords: root,bitnami,it also doesn’t work.

I found the file /installdir/apps/redmine/config/database.yml, it shows,
_________________________
production:
adapter: mysql
database: bitnami_redmine
host: localhost
username: bitnami
password: 68cee79453
port: 3306
reconnect: true
encoding: utf8
__________________________

I thied the username “bitname” and the password “68cee79453”, i can NOT backup the database too.

so,which is the right user and password? or which step am i wrong?
Anyone who can help me?

Many thanks.

 
05 Aug, 2011 04:51 AM
Avatar postgis58 2 post(s)

Topic: WAPPStack / Anyone know how to PostGis a WAPPStack?

Maybe its just me but I would think that the main draw to postgres would be the spatial functions. How do I add the PostGis extensions?

 
05 Aug, 2011 02:04 AM
Avatar smorris 7 post(s)

Topic: Cloud (Amazon AWS & BitNami Cloud Hosting) / Can't save phpmyadmin.conf (read-only)

Hello,
I installed a BitNami image on an ec2 instance (bitnami-wordpress-3.2.1-0-linux-x64-ubuntu-10.04-ebs (ami-1faaf85a)). After following the instructions I get to the bitnami homepage and can view my wordpress install.

I want to configure phpmyadmin so I can access it on the ec2 instance’s public IP and ultimately my domain, however I’m not able to save the phpmyadmin.conf. It says the file is read-only.

I’m assuming the correct way to edit this file is:
vi /opt/bitnami/apps/phpmyadmin/conf/phpmyadmin.conf ?
I’ve tried to save with :x! , but it still says it can’t write the file.

I would imagine this may be because the service needs to be stopped first before the file can be written, but I know very little about linux administration.

Any help would be greatly appreciated.
Thanks

 
04 Aug, 2011 07:36 PM
Avatar Beltrán Rueda 3,714 post(s)

Topic: Cloud (Amazon AWS & BitNami Cloud Hosting) / Amazon Linux AMI

Hi,

This is a new feature that we have in our TODO list. If you are interested on it please contact with us at info (at) bitnami (dot) org. Thanks.

 
04 Aug, 2011 07:30 PM
Avatar BAW 1 post

Topic: WordPress / can't get back to site

I had exactly the same problem of Safari not opening the link to my WP site that had worked perfectly just yesterday. As a new WordPress user I was very frustrated. But restarting both the MySQL Database and Apache Web Servers from the manager-osx and then going to my 127.0.0.1 link worked perfectly. Thanks for the tip!

 
04 Aug, 2011 03:51 PM
Avatar frequencydip 11 post(s)

Topic: Cloud (Amazon AWS & BitNami Cloud Hosting) / Amazon Linux AMI

I love running your modules, and am considering using the cloud hosting service but we want all of our linux systems running on Amazon Linux AMI’s so that Amazon supports the underlaying OS. Do you have plans to offer Amazon Linux as a base AMI in addition to Ubuntu?

 
04 Aug, 2011 01:51 PM
Avatar Beltrán Rueda 3,714 post(s)

Topic: Trac / Cannot install Bitnami Trac Stack. "There has been an error...nl.dat: Permission denied"

Hi,

This is a Babel file required for Trac. Coudl you try with the new version that we released today?

 
04 Aug, 2011 01:50 PM
Avatar Beltrán Rueda 3,714 post(s)

Topic: Liferay / Where liferay store information about permissions

Sorry but I’m not a Liferay developer, I can not help you with this issue. Maybe you can find more help in the Liferay forums.

Next Page

Pages: 1 2 4 6 7 8 9 405 406